Home :: Dies :: Competition Dies :: Competition Dies full length - 2 die set | RCBS

Competition Dies full length - 2 die set | RCBS

Competition Dies full length - 2 die set | RCBS
RCBS Competiton Seater Cutaway
These die sets are made with the precision shooter in mind. All Competition Dies are manufactured with very precise dimensions for minimum tolerance. The interior polish of these dies helps the brass work smoothly with little friction. The die body is made of hardened steel with an external oxide finish, which does not chip or peel with age as plated dies do. The die is machined to extremely close tolerances to make sure it yields maximum concentricity between the neck and the body of the die. The sizing dies are vented to avoid case damage caused by trapped air. They have absolutely minimum headspace tolerances and provide minimum sizing on case length. The standard assemblies for the sizer have an expander ball in the middle of the rod, which assists in easier operation when extracting the case from the die.

FEATURES & BENEFITS
Full-length sizer with a raised expander ball allowing extra leverage for smooth, effortless neck expansion
Maximum concentricity between die neck and body
Seater die with micrometer for super accurate bullet seating depth in increments of 0.001
Bullet inserts through a side window instead of bottom of die
Special bullet-seating guide ensures correct bullet alignment before and after seating.
Extended shell holder for shorter cartridges
Black oxide finish
Not for use with progressive reloading presses

The seating die is made with a unique alignment device built into it, aligning the bullet with the case mouth the instant before seating. In addition it is fitted with a micrometer head to allow setting adjustments of the bullet seating depth in increments of .001 so there is no guessing or trial and error in adjusting the bullet seating depth. The seating die also features the loading window with a sliding guide to provide the correct bullet alignment before and after seating as with the sizing die. The shorter calibers have extended lock rings with socket head screws. The die sets include a Lock Ring Wrench and extra Decap Pins. Extended head furnished where needed. These dies are available in the calibers listed below.

See Reference Section for Competition Dies [PDF] (see HDS Catalog page 79)

204 Ruger +
22 Hornet +
222 Remington +
223 Remington +
22-250 +
243 Winchester +
25-06
6.5x55 Swedish Mauser +
270 Winchester
7mm-08 Remington +
7mm Rem Mag
7x64 Brenneke
7.5x55 Schmidt-Rubin
30-06 Springfield
308 Winchester +
8x57 Mauser


NOTE:
(+) Competition extended shell holder required for bullet seating is included.
(*) Current O ring style only.
15%
Details
Part # 10-39401
Weight 1.60 lbs
 
List price (market price): $139.98
Price : $118.63
Options
Choose Cartridge:
Quantity
30-40 K Cases
338 Win. Mag | Norma
6.5x55 | Norma
30-40 K Cases 338 Win. Mag | Norma 6.5x55 | Norma
$36.98
$54.98
$59.98
 
280 Ack UMP
222 Rem. Match | Lapua
30 Caliber (.308") | Woodleigh
280 Ack UMP 222 Rem. Match | Lapua 30 Caliber (.308") | Woodleigh
$75.98
$67.98
$41.98
 
22 Caliber (.224") | Hornady
30 Caliber / 7.62mm (.308") | Sierra
30 cal (.308") | Hornady
22 Caliber (.224") | Hornady 30 Caliber / 7.62mm (.308") | Sierra 30 cal (.308") | Hornady
$18.21
$23.17
$15.65