|
RCBS PRO 2000 PROGRESSIVE PRESS |
Order Form
|
THESE PRICES REFLECT CURRENT INCREASES EFFECTIVE 03/30/12.
|
|
Part # |
Description |
Retail |
|
88875 |
Pro 2000 Progressive Press |
555.12 |
|
88877 |
Pro 2000 / Piggyback-3 -4 Die Plate |
23.98 |
|
88876 |
Pro 2000 Tube Priming Kit |
141.98 |
|
88878 |
Star Wheel |
8.98 |
|
88879 |
Low Primer Detector Kit |
43.98 |
|
specify |
Shell Plates (page 5, Ref Section 74,75,80) PDF |
39.98 |
|
RCBS PRO 2000 PROGRESSIVE PRESS
The Pro 2000 is an easy to use five station manual indexing progressive press. Simply insert a cartridge case and bullet, cycle the handle and index the shell plate. The five station design allows for the use of a Powder Checker or Lock-Out die or you can seat bullets and crimp cases in separate operations. You can use APS or tube priming systems that eliminates primer spills. The quick change die plate allows you to leave dies set for quick caliber changeover and will accept any standard 7/8”–14 threaded dies. The Uniflow Powder Measure coupled with the Case Activated linkage system means powder charges will be dispensed accurately and only if a cartridge case is present! The large working window and Universal Case Retention system allows easy removal and insertion of cases at any station. Compound leverage makes resizing rifle and pistol cases effortless. The rugged cast iron frame will provide a lifetime of service and the RCBS warranty guarantees it! (dies not included).
PRO 2000 / PIGGYBACK-3 & -4 DIE PLATE
Make caliber changes quickly and easily. Leave the
reloading dies set up. Eliminates the need to install
and adjust dies for each reloading session.
CLICK IMAGES TO ENLARGE |
|
RCBS PRO 2000 AUTO INDEX PRESS & UPGRADE KIT |
Order Form
|
|
Part # |
Description |
Retail |
|
88882 |
Pro 2000 Auto Indexing Progressive Press |
621.25 |
|
88883 |
Pro 2000 Auto Indexing Upgrade Kit |
140.98 |
|
Take your reloading to the next level with the RCBS Pro 2000 Auto Index Press. Five station automatic indexing for maximum production in shorter sessions with a load rate of approximately 600 rounds per hour. APS priming for the safest, most convenient priming system on the market. Case activated powder measure stops accidental spillage while the case retention system provides quick access to cases. Quick change die plate for fast caliber change over. Ability to change primer sizes in less than a minute. Uniflow Powder Measure, APS Strip Loading Tool, 32 empty APS Strips, bullet tray, empty brass bin and loaded ammo bin included.
The Upgrade Kit allows you to convert your manual indexing Pro 2000 to automatic indexing operation.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
88881 |
Die Plate / Shell Plate Rack NEW |
22.98 |
|
Keep your Pro 2000, PiggyBack-3 or PiggyBack-4 die plates and five station shell plates organized. This handy rack can be mounted horizontally on your bench or vertically on the wall. The stamped steel rack securely holds your preset die plate and a side slot keeps the five station shell plate in place. An identification label is also included.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
88901 |
Turret Press |
234.70 |
|
88902 |
Turret Head |
59.98 |
|
RCBS TURRET PRESS
Simple operation- no complex or automated processes. You have complete control over every reloading step. May be operated in progressive or single-stage mode.
In the progressive mode, output can be increased from 50 to 200 rounds per hour. Or, if preferred, the press can be used as a single-stage press and load cases in the batch mode.
Rugged, cast iron frame, toggle block and turret head. Heavy-duty construction to minimize springing. Detent on Turret Head for positive alignment. Standard 7/8”-14 threads for most popular reloading dies and accessories. Six-Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time. Turret Head held in place by one bolt for quick, easy change-overs. Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left-hand use. Standard Shell Holders slip into press ram and are securely held in place by a clip spring.
Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included.
The Primer Catcher eliminates spent primers on floor—snaps off for easy emptying. Baked epoxy finish for quick, easy cleaning, chip and fade resistant.
NOTE: We highly recommend the optional Uniflow Powder Measure with Case Activated Linkage Kit for use on the Turret Press (sold separately). See page 8, 10. (Dies and Accessory Base Plate not included).
TURRET HEAD
Makes changing calibers quick and simple. Leave the dies set up in the Turret Head and change the Head—one bolt does the trick! Six stations with standard 7/8”-14 threads. (dies not included).
CLICK IMAGES TO ENLARGE |
|
Part # |
Description |
Retail |
|
88907 |
Turret Deluxe Reload Kit NEW |
461.15 |
|
RCBS TURRET PRESS
With this kit you’ll only need to add a Reloading Die Set and Shell Holder for the caliber(s) you intend to reload. Information on each individual kit component is described elsewhere in this catalog—see the index. Buy the kit and save about 10% of the price of each item separately.
Contents: Turret Press, Uniflow Powder Measure, Model 5-0-2 Reloading Scale, Speer #14 Reloading Manual, Case Lube Kit-2, Deburring Tool, Universal Case Loading Block, Fold-up Hex Key Wrench Set, Primer Tray-2, and Powder Funnel.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
88703 |
Ammomaster-2 Press |
289.80 |
|
88799 |
AmmoMaster Auto / Piggyback II Die Plate |
45.98 |
|
RCBS AMMOMASTER-2 PRESS
The AmmoMaster-2 single stage press has been improved with the installation of the longer support columns and larger toggle block found on our AmmoMaster .50 BMG press. While still set up to use standard 7/8”-14 thread dies and standard shell holders to load most any pistol or rifle caliber, the addition of the .50 BMG 1-1/2” Die Kit (88705) will allow you to load from .25 ACP to .50 BMG. Main frame threaded diameter 1-1/2”. This single stage press offers you all the clearance, strength and leverage that you need to load, form cases, and bullet swage. (Dies not included).
AmmoMaster Auto / Piggyback II Die Plate
Reduce the time and effort to remove, replace and adjust dies when making caliber changes on your AmmoMaster Auto or Piggyback II conversion unit. This replacement top plate allows you to have additional calibers set up and ready. It is complete with five station top plate, clutch bearing with bushing, cam wire clip with lock nut and setscrew. (dies not included).
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
88709 |
Ammomaster Fifty Kit (1-1/2") |
170.98 |
|
88705 |
Ammomaster 50 BMG Die Kit (1-1/2") |
483.98 |
|
86767 |
Dust Cover |
19.98 |
|
RCBS AMMOMASTER FIFTY KITS
For original AmmoMaster owners wishing to load 50 BMG, two kits are necessary. The 50 BMG 1-1⁄2” Press Conversion Kit* and the .50 BMG 1- 1⁄2” Die Kit.
The Press Conversion Kit
The Press Conversion Kit is used to change an AmmoMaster Single stage press over to use the 1-1/2” .50 BMG dies. The kit contains the larger toggle block, support columns, top plate, .50 BMG Shell Holder and .50 BMG Ram Priming Unit.
50 BMG Die Kit
The Die Kit contains a Full Length Size Die, Roll Crimp Seat Die, Trim Die, .50 BMG Shell Holder and .50 BMG Ram Priming Unit.
CLICK IMAGES TO ENLARGE
|
|
Part # |
Description |
Retail |
|
88700 |
50 BMG Pack |
630.40 |
88715 |
Standard Shell Holder Adapter |
28.98 |
|
9348 |
Deburring Tool .17 to .60 Caliber |
25.98 |
|
RCBS 50 BMG PACK
The AmmoMaster .50 BMG Pack makes reloading for the .50 Browning Machine Gun cartridge a simple task. Manufactured to accept RCBS 1-1⁄2” .50 BMG dies, along with the massive 1” solid steel ram, provides more than enough strength to handle the .50 and will provide a lifetime of service. This kit includes the press, Full-Length Sizer, Seater Die, Shell Holder, Ram Priming Unit and Trim Die in one convenient box. The only extras required are cartridge components and the rifle to fire them!
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
87810 |
RCBS Piggyback-3 |
419.10 |
|
87811 |
RCBS Piggyback-4 |
419.10 |
|
88877 |
Piggyback-3, -4 Pro 2000 Die Plate |
23.98 |
|
88878 |
Star Wheel |
8.98 |
|
specify |
Shell Plates (page 5, Ref Section 74,75,80) PDF |
39.98 |
|
- |
- |
- |
|
86767 |
Piggyback Dust Cover |
19.98 |
|
RCBS PIGGYBACK-3 & -4
If you own a RCBS Rock Chucker, Reloader
Special-3, or Reloader Special-5, (each sold
separately), you know they’re some of the finest
single-stage presses ever built. The Piggyback
3 moves you from single-stage reloading
to 5 station manual indexing, progressive
reloading in one step, and moves your output
from 50 rounds an hour to well over 400.
If you own the new Rock Chucker Supreme,
the Piggyback 4 will convert the press to progressive.
Optional extra Star Wheel can remain
permanently attached to the shell plate for
quicker caliber changes.
Features of the Piggyback-3 & -4
- Easy installation
- Fastest and simplest caliber conversion of any progressive
Press on the market
- Best powder dispensing method available
- Utilizes APS Priming System, the most reliable, convenient
and safest available
- Handles all 7/8"-14 dies
- Piggyback 3 Reloads all pistol (except 25 auto) and rifle
calibers up to 223 Rem.
(2.260" OAL)
- Piggyback 4 Reloads all pistol (except 25 auto) and rifle
calibers up to 30-06 Sprg.
(3.340" OAL)
- Five stations allow use of lube die, lock out die, separate crimp die
- Simple Universal Case Retention System allow easy removal and insertion of cases at each station
- Self-cleaning Shellplate Holder
- Includes bullet tray, loaded cartridge box and empty case box
CLICK IMAGE TO ENLARGE |
|
RCBS ACCESSORIES for the PIGGYBACK CONVERSION |
Order Form
|
|
Part # |
Description |
Retail |
|
88799 |
Piggyback II / AmmoMaster Auto Die Plate |
45.98 |
|
86767 |
Piggyback Dust Cover |
19.98 |
|
RCBS ACCESSORIES FOR THE PIGGYBACK CONVERSION
There are several accessories for the Piggyback conversions that
we feel are worth listing. You can purchase separate top plate assemblies
to shorten the time required to change calibers by leaving the dies
set up in the top plate. The same is true of the Primer Transfer Roller
Assembly. When you're changing primer size, it's nice to have the unit
already set up. The Piggyback Powder Measure Adapter Assembly is another
unit that is handy to have on the bench. The Piggyback Stand is nice to
have to store your Piggyback unit on, when it is not on the press. The
Piggyback Dust Cover is a welcome addition to any unit to keep it clean
and dust free.
|
|
AMMOMASTER/PRO 2000/PIGGYBACK 5 STATION SHELL PLATES |
Order Form
|
|
Part # |
Description |
Retail |
|
specify |
Ammomaster / Piggyback Shell Plates |
39.98 |
|
RCBS AMMOMASTER / PRO 2000 / PIGGYBACK SHELL PLATES
Order by part number. Locate your caliber with the RCBS Reference Section pages 74,75,80 of the print catalog.
IMPORTANT: Shell holder numbers do not correspond to those of other manufacturers. When two shell holders are listed, the most popular is shown first. It may be necessary to use the alternate, depending on the manufacturer and/or lot of cases being used.
|
|
No. 1 |
88801 |
|
No. 2 |
88802 |
|
No. 3 |
88803 |
|
No. 4 |
88804 |
|
No. 5 |
88805 |
|
No. 6 |
88806 |
|
No. 7 |
88807 |
|
No. 8 |
88808 |
|
No. 9 |
88809 |
|
No. 10 |
88810 |
|
No. 11 |
88811 |
|
No. 12 |
88812 |
|
No. 13 |
88813 |
|
No. 14 |
88814 |
|
No. 15 |
88815 |
|
|
No. 16 |
88816 |
|
No. 17 |
88817 |
|
No. 18 |
88818 |
|
No. 19 |
88819 |
|
No. 20 |
88820 |
|
No. 21 |
88821 |
|
No. 22 |
88822 |
|
No. 23 |
88823 |
|
No. 24 |
88824 |
|
No. 25 |
88825 |
|
No. 26 |
88826 |
|
No. 27 |
88827 |
|
No. 28 |
88828 |
|
No. 30 |
88830 |
|
|
No. 31 |
88831 |
|
No. 32 |
88832 |
|
No. 33 |
88833 |
|
No. 34 |
88834 |
|
No. 35 |
88835 |
|
No. 36 |
88836 |
|
No. 37 |
88837 |
|
No. 38 |
88838 |
|
No. 39 |
88839 |
|
No. 40 |
88840 |
|
No. 41 |
88841 |
|
No. 42 |
88842 |
|
No. 43 |
88843 |
|
No. 44 |
88844 |
|
No. 45 |
88845 |
|
|
Part # |
Description |
Retail |
|
specify |
4x4 Shell Plate |
43.98 |
|
RCBS 4X4 SHELL PLATES
Order by part number. Locate your caliber with the RCBS Reference Section page 74,75,80 of the print catalog.
IMPORTANT: Shell holder numbers do not correspond to those of other manufacturers. When two shell holders are listed, the most popular is shown first. It may be necessary to use the alternate, depending on the manufacturer and/or lot of cases being used.
CLICK IMAGE TO ENLARGE |
|
No. 1 |
87601 |
|
No. 2 |
87602 |
|
No. 3 |
87603 |
|
No. 4 |
87604 |
|
No. 6 |
87606 |
|
No. 7 |
87607 |
|
No. 9 |
87609 |
|
No. 10 |
87610 |
|
- |
- |
|
|
No. 16 |
87611 |
|
No. 12 |
87612 |
|
No. 15 |
87615 |
|
No. 16 |
87616 |
|
No. 17 |
87617 |
|
No. 18 |
87618 |
|
No. 19 |
87619 |
|
No. 20 |
87620 |
|
- |
- |
|
|
No. 21 |
87621 |
|
No. 23 |
87623 |
|
No. 24 |
87624 |
|
No. 25 |
87625 |
|
No. 26 |
87626 |
|
No. 27 |
87627 |
|
No. 28 |
87628 |
|
No. 30 |
87630 |
|
No. 32 |
87632 |
|
|
Part # |
Description |
Retail |
|
9356 |
Rock Chucker Supreme Press |
161.70 |
|
RCBS ROCK CHUCKER SUPREME PRESS
The most popular reloading press just got better!
The Rock Chucker press has been
lenthened to allow easy loading of today’s longer
cartridge designs and renamed The Rock
Chucker Supreme. With the same easy operation,
ambidextrous handle, 4-1/4” opening,
strength and versatility, the Rock Chucker Supreme
is ideal for the beginner and pro alike. It
can also be upgraded to a progressive loader
with the addition of a Piggyback-4.
CLICK IMAGE TO ENLARGE |
|
RCBS ROCK CHUCKER SUPREME MASTER RELOADING KIT |
Order Form
|
|
Part # |
Description |
Retail |
|
9361 |
R.C. Master Supreme Reloading Kit NEW |
377.95 |
|
RCBS ROCK CHUCKER SUPREME MASTER RELOADING KIT
We’ve taken the new benchmark of single stage presses and
surrounded it with the equipment you need (except dies and
shell holders) to start loading like a
pro. A simple solution for the beginner
and pro alike, it is easily upgraded
to progressive operation
with the optional Piggyback-4. The
Rock Chucker Supreme Master Reloading
Kit includes: Rock Chucker
Supreme press, 5-0-5 Scale,
Uniflow powder measure, Speer #14 reloading
manual, hand priming tool, hex key set, Universal case loading
block, case lube kit-2, powder funnel and deburring tool.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
9285 |
Reloader Special-5 |
132.20 |
|
This is the press that replaced the Reloader’s Special-3. The
same dependability but with the additional feature of allowing
you to use shotshell dies with this
press. The unit frame is offset 30
degrees for an unobstructed front
access. Its all-aluminum frame is
made with a 48,000-psi aircraft
type alloy. The press offers the famous
Block “0” Design, which provides
the strength of design. The
press is offered without dies or shell holder.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
9046 |
Reloader's Starter Kit NEW |
300.20 |
|
RCBS RELOADERS STARTER KIT
This offers the reloader a medium
priced quality press and accessories
to start the new
reloader with the equipment that
they need. This unit consists of
the Reloader’s Special-5 Press,
505 Reloading Scale, CaseLube
Kit-2, Speer #14 Reloading Manual, Universal Case Loading
Block, Primer Tray and Powder Funnel.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
87460 |
Partner Press |
77.20 |
|
RCBS PARTNER PRESS
This is the most inexpensive reloading
press that RCBS offers. As with other RCBS
presses, this press has the Block “0” Frame
compound leverage and RCBS quality. The
press handles the standard 7/8"-14 dies,
standard RCBS accessories and standard
shell holders.
CLICK IMAGE TO ENLARGE |
|
Part # |
Description |
Retail |
|
87467 |
Partner Standard Reloading Kit NEW |
194.85 |
|
RCBS PARTNER STANDARD RELOADING KIT
This is the smallest of the RCBS
family of starting kits. The Standard
Reloading Kit consists of the
Partner Press, 502 Scale, Case Lube
Kit, Speer Manual, Loading Block,
Primer Tray, Deburring Tool, and Powder Funnel.
CLICK IMAGE TO ENLARGE |
Part # |
Description |
Retail |
99972 |
Die Maintenence Kit |
30.98 |
DIE MAINTENENCE KIT
Keep your reloading gear in pristine condition with our Die Maintenance Kit. Outfitted with the necessary chemicals and brushes to clean reloading dies, this kit is perfect for removing dirt, oil and other debris from every nook and cranny. They also come equipped with special chemicals and oils designed for safe, longterm storage of your reloading equipment.
|
|
Part # |
Description |
Retail |
|
89301 |
HDS Aluminum Primer Catcher |
17.50 |
|
HDS ALUMINUM PRIMER CATCHER
If you are tired of breaking the plastic primer catcher on your
Rock Chucker, JR or RS presses, this is the
ideal replacement. Cast from aluminum
from the original design, and designed to
be held onto the press with a rubber band.
This is a must for the serious reloader.
It will not fit Rock Chucker Supreme.
Will not fit Rock Chucker Supreme.
|
|
Part # |
Description |
Retail |
|
89100 |
HDS Compac Tool |
137.50 |
|
HDS COMPAC RELOADING TOOL
This unit is designed with the Back
Packer, Black Powder Shooter, Bench
Rest Shooter, and those that require a
small portable reloading tool. This unit
is made with high quality aircraft aluminum
and steel parts. This unit accepts
any 7/8”-14 dies and standard shell
holder heads. The tool works
especially well with window type
seating dies. The unit can be mounted
on a bench. If space and portability are important to you, this is
your kind of tool. Size 3-1/2" x 9".
|
|
Part # |
Description |
Retail |
|
86881 |
Standard Press Equipment Cover |
11.98 |
|
86767 |
Progressive Press Equipment Cover |
19.98 |
|
86880 |
Powder Measure Equipment Cover |
11.98 |
|
EQUIPMENT COVERS
These covers protect your reloading press & powder measure from dust. Ensure proper funtioning of your equipment by eliminating dust and abrasives that prevent accurate measurements. All sizes available to fit most presses, powder measures and miscellaneous reloading machines.
|
Site by: HUNTINGTON DIE SPECIALTIES | 043012
|
|