|
 These die sets are made with precision shooter in
mind. All Competition Dies are manufactured with very precise dimensions
for minimum tolerance. The interior polish of these dies helps the brass
work smoothly with little friction. The die body is made of hardened steel
with an external oxide finish, which does not chip or peel with age as
plated dies do. The die is machined to extremely close tolerances to make
sure it yields maximum concentricity between the neck and the body of the
die.
The sizing dies are vented to avoid case damage caused by trapped air. They
have absolutely minimum headspace tolerances and provide minimum sizing on case
length. The standard assemblies for the sizer have an expander ball in the
middle of the rod, which assists in easier operation when extracting the case
from the die.
The seating die is made with a unique alignment device built into it, aligning
the bullet with the case mouth the instant before seating. In addition it is
fitted with a micrometer head to allow setting adjustments of the bullet seating
depth in increments of .001" so there is no guessing or trial and error in
adjusting the bullet seating depth. The seating die also features the loading
window with a sliding guide to provide the correct bullet alignment before and
after seating as with the sizing die. The shorter calibers have extended lock
rings with socket head screws. The die sets include a Lock ring wrench and extra
Decap Pins. These dies are available in the calibers listed below.
For specific description see the RCBS Reference Section/Reloading Dies [PDF] , or in the HDS Catalog page 79.
CLICK ON PHOTO TO ENLARGE
|
|
Part # |
Description |
Retail |
|
specify |
Competition Die Set |
105.00 |
|
Part #
|
Caliber
|
|
Part #
|
Caliber
|
|
39401
|
204 Ruger
|
|
38301
|
22 Hornet
|
|
37001
|
222 Remington
|
|
37201
|
223 Remington
|
|
37101
|
22-250
|
|
39501
|
25-06
|
|
37301
|
243 Winchester
|
|
38401
|
6.5X55 Swedish
|
|
37501
|
270 Winchester
|
|
37401
|
7mm-08 Remington
|
|
37601
|
7mm Rem Mag.
|
|
38501
|
7x64 Brenneke
|
|
38601
|
7.5 Schmidt-Rubin
|
|
37701
|
30-06 Springfield
|
|
37801
|
308 Winchester
|
|
38701
|
8X57 Mauser
|
|
RCBS COMPETITION EXTENDED SHELL HOLDERS |
Order Form
|
|
Part # |
Description |
Retail |
|
specify |
Competition Extended Shell Holder |
13.98 |
|
Part #
|
Caliber
|
|
Part #
|
Caliber
|
|
38262
|
22 Hornet
|
|
38260
|
222, 223
|
|
38253
|
22-250
|
|
38253
|
243 Winchester
|
|
38252
|
6.5 x 55 Swedish Mauser
|
|
38253
|
7-08
|
|
38253
|
308 Winchester
|
|
38279
|
#38 Ultra Mags
|
|
38280
|
#43 WSM Mags
|
|
-
|
-
|
|
The competition-seater die can be used for other calibers than those
listed above. Short cases require an extended shell holder to properly
work with the die. We also offer special sleeve and seating plugs in calibers
such as 25, 338, 375, etc. Please contact us for further information on these
dies. In the reference section, you will find a listing of the various parts
available for the competition dies. The Competition Seating Die Body is
universal, therefore by changing Sleeves, Seating Plugs, and sometimes Shell
Holder Extensions, it is possible to use a Competition Seating Die with many
of your standard dies sets. Remember, if the caliber is not listed below
contact us for the availability. OTHER CALIBERS AVAILABLE ON SPECIAL ORDER.
For specific description see the RCBS Reference Section/Reloading Dies [PDF] , or in the HDS Catalog page 79.
CLICK ON PHOTO TO ENLARGE
|
|
Part # |
Description |
Retail |
|
specify |
Competition Seater Die |
68.15 |
|
Part #
|
Caliber
|
|
Part #
|
Caliber
|
|
39438
|
204 Ruger+
|
|
38338
|
22 Hornet+
|
|
37038
|
222 Remington+
|
|
37238
|
223 Remington+
|
|
37138
|
22-250+
|
|
39538
|
25-06
|
|
37338
|
243 Winchester+
|
|
38438
|
6.5X55 Swed. Mauser+
|
|
37538
|
270 Winchester
|
|
37438
|
7mm-08 Remington+
|
|
37638
|
7mm-Rem. Mag.
|
|
38538
|
7x64 Brenneke
|
|
38638
|
7.5 Schmidt-Rubin
|
|
37738
|
30-06 Springfield
|
|
37838
|
308 Winchester+
|
|
38738
|
8x57 Mauser
|
|
Competition Seating Die Body is universal, therefore by changing Sleeves,
Seating Plugs, and sometimes Shell Holder Extensions, it is possible to use a
Competition Seating Die with many of your standard dies sets. Remember, if the
caliber is not listed below contact us for the availability.
|
|
Part # |
Description |
Retail |
|
Specify |
Competition Seater Plug |
12.98 |
|
Part #
|
Caliber
|
|
Part #
|
Caliber
|
|
38150
|
20 Cailber
|
|
38151
|
22 Caliber
|
|
38152
|
243 Caliber, 6mm
|
|
38153
|
25 Caliber
|
|
38154
|
6.5mm
|
|
38155
|
270 Caliber
|
|
38156
|
7mm
|
|
38157
|
30 Caliber / 7.5mm
|
|
38159
|
8mm
|
|
-
|
-
|
|
Competition Seating Die Body is universal, therefore by changing Sleeves,
Seating Plugs, and sometimes Shell Holder Extensions, it is possible to use a
Competition Seating Die with many of your standard dies sets. Remember, if the
caliber is not listed below contact us for the availability.
|
|
Part # |
Description |
Retail |
|
Specify |
Competition Bullet Guide |
8.98 |
|
Part #
|
Caliber
|
|
Part #
|
Caliber
|
|
38201
|
20 Caliber
|
|
38202
|
22 Caliber
|
|
38205
|
243 Caliber, 6mm
|
|
38206
|
25 Caliber
|
|
38207
|
6.5mm
|
|
38208
|
270 Caliber
|
|
38209
|
7mm
|
|
38212
|
30 Caliber / 7.5mm
|
|
38214
|
8mm
|
|
-
|
-
|
Site by: HUNTINGTON DIE SPECIALTIES | 040212
|
|
