|
The RCBS Large Caliber dies are made in 1-1/2” thread diameter. These dies are manufactured to RCBS’ usual high standards. The dies will work in the RCBS Ammomaster, Hollywood and the Rock Crusher Presses. Please specify the type of press you intend to use or the diameter of the threads. The Corbon H-type presses also work with the RCBS Large Caliber dies. See Reference Section on pages 81. [PDF]
|
|
Part # |
Description |
Retail |
|
30001 |
Full Length Die Set (1-1/2"x12) |
281.60 |
|
30030 |
Neck Sizer Die, (1-1/2"x12) |
216.98 |
|
30065 |
Trim Die (1-1/2"x12) |
172.98 |
|
09560 |
Bench Priming Tool |
111.15 |
|
Part # |
Description |
Retail |
|
88746 |
Shell Holder, .50 BMG |
25.98 |
|
9446 |
Bullet puller without collet, (1-1/2”-12) |
160.98 |
|
9448 |
Bullet puller collet, .50 BMG |
63.98 |
|
88772 |
Ram Priming Unit w/shell holder .50 BMG (1-1/2”) |
52.98 |
|
9602 |
.50 BMG Decap Pins (2) |
6.98 |
|
90352 |
.50 BMG Case Trimmer - Big Bore |
122.50 |
|
9629 |
1-1/2”x12 Lock Ring |
9.98 |
|
9562 |
Military Crimp Remover - 50 BMG |
31.98 |
|
9561 |
Carbide Primer Pocket Uniformer - 50 BMG |
54.98 |
|
Part # |
Description |
Retail |
|
14501 |
Full Length Die Set, (1-1/2”-12) |
281.60 |
|
14530 |
Neck Sizer Die, (1-1/2”-12) |
216.98 |
|
9447 |
Bullet puller collet, .416 Barrett |
63.98 |
|
Part # |
Description |
Retail |
|
27501 |
Full Length Die Set, (1-1/2”-12) |
281.60
|
|
27530 |
Neck Sizer Die, (1-1/2”-12) |
216.98 |
Site by: HUNTINGTON DIE SPECIALTIES | 031511
|
|